10. Communication Functions: * Software of Supervisor & Controller. * RS232 Communication interface (to be chosen). * RS485 Communications interface (to be chosen). 701 Control System (see Picture 11b) Main Features:  Control Mode in the centre of micro processor.  Switch Control by keys so as to safeguard the …

If frequency “F” is 50Hz, the genset tachometer is: 50 × 60/2=1500 rpm 8. Movement of Paralleling Diesel Gensets Paralleling mode is available to increase the output power of genset, decrease the total investment amount and improve the reliability of power supply and economical efficiency. The power between two the …

If the pipeline‟s elbows too many, the diameter of the exhaust pipeline must be enlarged. F. If the noise of the shutter needs lowering in advance, the 2nd class muffler can be installed. (see Picture 3) (Picture 3: A. The exhaust pipeline can be moved freely within the frame. B. …

Turbocharger User’s Manual Working Principle The turbocharger makes use of exhaust air of an engine to drive a turbine, the running turbine drives a air compressing impeller running at high speed, the compressed fresh air is aspirated into the cylinders of the engine for increasing the air-fuel ratio. Improving efficiency, …